BGHYB - FISKE'S 722 OIL
- MSDS: BGHYB
- Manufacturer: FISKE BROTHERS REFINING CO
- Product Name: FISKE'S 722 OIL
- National Stock Number: 9150-01-048-9554
Product Identification
Product ID:FISKE'S 722 OIL
MSDS Date:11/01/1985
FSC:9150
NIIN:01-048-9554
MSDS Number: BGHYB
Responsible Party
NEWARK, NJ 07105-4720
US
Emergency Phone: 201-589-9150
Info Phone: 201-589-9150
Preparer: ROBERT J.SIBILIA
Cage: 9N579
Contractor
Telephone: 804-355-8041
Cage: 6A908
Ingredients
MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS: 8012-95-1
RTECS: PY8030000
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3/10 STEL;9192
UNIDENTIFIED COMPONENTS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF EYES,SKIN OR
RESPIRATORY TRACT. CHRONIC:NO DATA AVAILABLE,POSSIBLE DERMATITIS.
Effects of Overexposure:MAY CAUSE IRRITATION OF SKIN,EYES, RESPIRATORY
TRACT;LOW ORDER OF TOXICITY.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS MAY BE
WORSEN.
First Aid
First Aid:EYES:WASH WITH PLENTY OF WATER;CALL A PHYSICIAN. SKIN:WASH
WITH SOAP & WATER. INHALATION:REMOVE TO FRESH AIR,CALL A PHYSICIAN.
Fire Fighting
Flash Point Method:COC
Flash Point:275F/135C
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:FOAM,DRY CHEMICAL,CO2,WATER SPRAY
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:DO NOT STORE WITH STRONG OXIDANTS.
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;USE SUITABLE
INERT ABSORBENT MATERIAL & RECOVER FOR PROPER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL,DRY AND WELL VENTILATED
AREA. KEEP AWAY FROM HEAT,OPEN FLAMES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
VAPOR/MIST IF ABOVE TLV/PEL.
Ventilation:LOCAL/GENERAL TO MAINTAIN BELOW TLV/PEL
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:FULL SKIN & EYE PROTECTION
Work Hygienic Practices:AVOID CONTACT WITH SKIN AND EYES;DO NOT BREATHE
VAPORS/MIST.
Supplemental Safety and Health
MSDS RECEIVED BY DGSC-SLM:MARCH 4, 1988, ORIGINALLY AND AGAIN NOVEMBER,
1993.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>550F/288C
Vapor Pres:<0.01 MM
Vapor Density:>5.0
Spec Gravity:0.81
Evaporation Rate & Reference:<0.01 (N.BUT.ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TRANSPARENT,AMBER LIQUID WITH MINERAL OIL ODOR
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS,LIQ CL2,CONC O2.
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:CO GAS IF INCOMPLETE COMBUSTION
Disposal
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.